CREA TARIMAS ANTIDESLIZANTE

major temperature differences accelerate degradation of the varnish.
- When there is a noticeable loss of non-slip properties, perform maintenance. If there is little loss of the original colour, only the finishing coat/s is/are necessary.

Soporte Nuevo:
New wood:
- The base must be free from foreign products and/or residue.
- Apply to woods with a moisture content lower than 20%.
- Apply to healthy, grease-free, dust-free, dry wood.
- Sand down to remove any traces of glue in joints and milling defects.
- If the wood shows signs of aging must be previously sanded and removed by brushing or any other mechanical means.
- Apply a maximum of 120 g/m2 with each coat. Distribute the non-slip particles evenly. Restauracion y Mantenimineto:
Varnished or painted wood:
- If the wood has been varnished with open pore and the condition of the wood allows, remove varnish that is loose or in poor condition, gently sand, remove the sanding dust and proceed as with new wood.
- If it has been varnished with cellulose or polyurethane varnishes and the condition of the wood allows, remove by stripping with chemical or mechanical means and proceed as with new wood.
-If they have been enamelled with synthetic enamel remove by pickling or by mechanical means and proceed as on new woods.
- Apply a maximum of 120 g/m2 with each coat. Distribute the non-slip particles evenly.
Maintenance:
- Cleaning with low-pressure water cleaner, taking care to ensure that the water temperature is not high.
- Avoid cleaning during the middle of the day, and check that the base is not hot