CREA SELLADORA

- Stir the product until it is perfectly homogenized.
- Apply following the rules marked in the attached application box.
- Do not apply the product at high temperatures, or on surfaces exposed to strong insolation.
- Maintain good ventilation conditions during the drying time.
- Do not apply with relative humidity higher than 80%.

Soporte Nuevo:
Cement, gypsum and its derivatives mortar:
- Wait until full setting (30 days minimum).
- Wait until they are very dry.
- The support must be free of foreign products and / or residues.
- Clean the support of possible efflorescence, as well as neutralize the alkaline surfaces.
- Putty with suitable putty the possible damage to the support.
New woods:
- Outdoors, protect the wood with Anticarcom as Klearxyl Di from attack by fungi and xylophagous insects.
- Apply on wood with a moisture content of less than 12%.
- Sand and eliminate possible glue residues in the assemblies and machining failures.
- If the wood shows signs of aging, it must be previously sanded and dust removed by brushing or any other mechanical means. Restauracion y Mantenimineto:
Wood and work (plaster, cement and derivatives) painted:
- On varnished woods, remove by pickling or by mechanical means, removing foreign products, poorly adhered areas or in poor condition. Lightly sand, remove dust from sanding and proceed as on new wood.
- Outdoors, protect the wood with Anticarcom as Klearxyl Di from attack by fungi and xylophagous insects.