CREA ANTITANINOS

- Stir the product until it is perfectly homogenized.
- Apply on clean and dry substrates.
- Apply following the dilutions recommended in the Application Systems section.
- Pre-sand to guarantee a good penetration and leveling on the wood.
- Do not apply the product at high temperatures, or on surfaces exposed to strong insolation.
- Maintain good ventilation conditions during the drying time.
- Do not apply with relative humidity higher than 80%.

Soporte Nuevo:
New woods:
- In woods such as Pine, Oak, Chestnut, Iroko, Red wood, Mahogany, Teak and Walnut among others.
- The support must be free of foreign products and / or residues.
- Apply on wood with a moisture content of less than 20%.
- Apply on healthy, well-degreased, dust-free and dry woods.
- Sand and eliminate possible glue residues in the assemblies and machining failures.
- If the wood shows signs of aging, it must be previously sanded and dust removed by brushing or any other mechanical means. Restauracion y Mantenimineto:
Varnished or painted woods:
- If they have been varnished: Remove foreign products, remove areas that are poorly adhered or in poor condition, sand, remove the dust resulting from sanding and proceed as on new woods.
- If they have been varnished with closed-pore varnishes, remove them by stripping with universal stripper or by mechanical means and proceed as on new woods.
- If they have been varnished with cellulose or polyurethane varnishes, remove them by pickling or by mechanical means and proceed as on new woods.
- If they have been enameled with synthetic enamel, remove by stripping or by mechanical means and proceed as on new woods.