We are a Spanish company located in the town of Marines (Valencia).

In 2021 we celebrated our company's 60th anniversary. 

Yes it is possible, but first you must contact us at the following email address: sac@montopinturas.com

Yes, we are paint manufacturers.

We offer paints with different levels of resistance that are divided into classes, with class 1 being the most resistant. A plastic paint acquires maximum washability resistance 28 days after application. For more information, please refer to the product technical datasheets available on our website.

It depends on the type of product. You should check the technical datasheet to find out the optimum recommended amount to apply.

It depends on the type of product. You should check the technical datasheet for recommended repainting times. If you have already purchased the paint, you will find an icon/pictogram on the back of the packaging that indicates the recommended repainting time.

On the packaging you will find an icon/pictogram indicating whether the paint is suitable for interior use (INT), exterior use (EXT) or both (INT/EXT).  This information can also be found in the product technical datasheet.

Yes, in our stores you have the option to choose a colour or reproduce a specific colour from a colour chart or a sample that you provide us with.

It depends on the type of product. You should check the technical data sheet to find out the type and optimum amount of thinner to use.

The first thing you should do is check the technical datasheet to find out the type and quantity of thinner to use. Once added, stir until perfectly homogenised.

By checking the website. The product datasheets show you which sizes the products are available in.

Yes, warranty certificates are available for some of our products. For more information, please check the technical datasheet or contact our customer service department.

All the information regarding the use of a particular product can be found in the product technical datasheet on our website.

Yes, in principle most of our exterior paints are suitable for both, interior and exterior use.  You should check the technical datasheet for more information.

Although our entire range of wall and ceiling products can be used in children's rooms, we recommend the following: Uno Zero (with antibacterial preservative), Smart Aire Puro (purifies the air), Magnum Ecológico (for its low odour), Ovaldine 50 for its scent and Massima + for its high washability and toy safety certificate.  For more information, check the technical data sheet for each product.

Most of our products for walls and ceilings and façade coatings contain an anti-mould preservative. For more information, check the technical data sheet for each product.

Although our entire range of wall and ceiling products can be used in medical centres, we recommend the following: Uno Zero (with antibacterial preservative), Smart Aire Puro (purifies indoor air), Massima + and Ovaldine 50 for their high washability. For more information, check the technical data sheet for each product.

Although our entire range of wall and ceiling products can be used in the hospitality industry, we recommend the following: Uno Zero (with antibacterial preservative), Smart Aire Puro (purifies indoor air), Massima + and Ovaldine 50 for their high washability. For more information, check the technical data sheet for each product.

Although our entire range of walls and ceiling products can be used in sports centres, we recommend the following: Uno Zero (with antibacterial preservative), Smart Aire Puro (purifies indoor air), Massima + and Ovaldine 50 for their high washability. For more information, check the technical data sheet for each product.

If you are looking for a sanitary solution or sanitising product, we recommend using Uno Zero as it contains silver ions that help eliminate 99.99% of bacteria on contact. Another option would be SmartAire Puro, which purifies the environment through photocatalysis. On the other hand, if you are looking for products with high scuff resistance and high washability, we recommend Massima +, Ovaldine + and Ovaldine 50.

Normally those that are more breathable, to avoid blistering, and with an anti-mould preservative to prevent the appearance of mould. If the substrate is wet, it should not be painted, only Tixoway Antihumedad can be used. If it is a humid environment: L-500, Montokril Liso or Magnum Termoaislante.

Façade coatings contain special resins and components that enable them to resist the effects of UV rays, exposure to rain and humidity, environmental pollution and atmospheric agents.

All our façade coatings are waterproof. A number of standards and tests are available to assess waterproofing. More information about waterproofing can be found in the product technical datasheet.

The substrate must be in suitable condition, and in the case of previously painted substrates, the product being applied must be compatible with the substrate. A porous support is essential for good adherence. In general, you should not apply solvent-based products on water-based products, or two-component products on single-component products. For more information, you should check the product technical datasheet.

For humid outdoor climates, we recommend that you use paints with high waterproof properties and an anti-mould preservative. We would recommend paints containing an anti-mould preservative for interiors as well.

For façades located in highly polluted environments (large cities, areas close to industrial estates, motorways, etc.) you should use coatings with self-cleaning properties. These coatings repel water and dirt so that the façade is always kept clean. PRODUCTS: Ovaldine Siloxano, Ovaldine Montolite, Montokril+ Siloxano

Climates such as coasts, high mountain regions and highly polluted areas are considered extreme environments and require thefaçade to have extra protection to keep the building in optimal condition. We recommend the following: Massima Fachadas, Ovaldine Fachadas, Ovaldine Siloxano, Ovaldine Montolite, Ovaldine Elastic, Ovaldine Antifisuras

Ovaldine Elástic is our most elastic product,capable of covering cracks of up to 2 mm. Our Montokril Elastómero coating covers cracks of up to 1 mm. Finally, Ovaldine Antifisuras is ideal for covering microcracks up to 0.5 mm

Most of our paints are suitable for cement. For more information, check the technical data sheet for each product.

All our façade coatings are recommended for this application, but you should bear in mind that the higher the quality of the paint, the better the resistance will be on the substrate. Some tiles are treated to give them water-repellent or oil-repellent properties, in this case they must be primed with Imprimación Epoxi Suelos. You can test this by pouring water and/or solvent onto them to see if it is repelled. If they repel water, paint them with solvent-based products, and if they repel solvents, prime them with Imprimación Epoxi Suelos.

This can generally be painted with water-basedpaints, usually waterproofing paints.

The coatings that offer the best performance in extreme temperature conditions are photoreticulable coatings (they take advantage of solar energy during the drying process to form a more resistant film). Our photoreticulable elastic products are Ovaldine Elástic and Ovaldine Antifisuras. Tejamont Top Cover is available for waterproofing roofs.

Ovaldine Elástic is our most elastic product,capable of covering cracks of up to 2 mm. Our Montokril Elastómero coating covers cracks of up to 1 mm. Finally, Ovaldine Antifisuras is ideal for covering microcracks up to 0.5 mm

The most UV-resistant façade coatings are Massima Fachadas and Ovaldine Fachadas

The most breathable coatings will be those with a V1 or V2 classification, in accordance with UNE EN 1062-1. Products: Ovaldine Silicato, Ovaldine Siloxano, Ovaldine Montolite, Montokril+ Siloxano, Nevada Fachadas, Nevada Silflex.

All our technical datasheets are available for download from each product page on the website.

You can request safety datasheets at the point of sale where the product was purchased or by calling our customer service department.

We do offer products for boats, as long as the areas being painted are above water.

It depends on the enamel; alkyds will dry slightly faster with heat, as will acrylics. But you should never add a catalyst to a single-component product.

It can vary from 3 to 8 days, depending on the product applied. You should check the technical data sheet, where you will find the times for drying, repainting and filling the pool.

This will depend on the product that has been applied. Please refer to the technical datasheet provided on our website.

As a general rule, you should wait 7 days. But this depends on the product that has been applied, please refer to the technical datasheet provided on our website.

Both the technical datasheet (available on the website) and the back of the packaging indicate the solvent you should use as well as the recommended proportion.

There are standards for finding out the vapour or liquid permeability of a substrate. One simple way is to wet the surface and see what is absorbed.

As a general rule, if it melts and becomes sticky when you apply a solvent, that means the previous product is water-based. If it wrinkles, dissolves or is not affected, then it is likely a solvent-based product.

As a general rule, put some solvent on a rag and rub it; if it dissolves, it is probably a one-component product, if not, it is a two-component product.

It depends on the nature of both products, but as a general rule this is not recommended as the two-component product is usually harder, more resistant, etc., which creates greater surface tension and can lift the one-component product. You should also take into account that two-component solvent-based products are more aggressive and can dissolve or wrinkle the previous one (one-component).

As a general rule, yes, since the two-component product is more resistant and inert than the one-component product. This means that the substrate should be prepared, sanded, primed, etc.

Yes, it all depends on how you want to use itin the future. Glass is a difficult substrate to adhere to, so you would need to perform an adhesion test. We would recommend using multipurpose products, products designed for this exclusive purpose, or an adherent primer.

It depends on the type of product that caused the stain. You should check the technical datasheet. The nature of the substrate must also be taken into account, as it may be affected by the cleaning product you use

Any plastic paint from our catalogue would be suitable, as long as it is of medium viscosity so it can properly impregnate all the little nooks and crannies, and you should use a long-haired roller.

Stainless steel can be painted with any of our enamels. We recommend sanding first to mattify the surface.

In principle, any paint is suitable for this type of inorganic substrate. In any case, we recommend using a primer on the substrate.

In principle, aluminium can be painted with any two-component solvent-based enamel or multipurpose water-based paint.

We would only recommend painting the exterior of metal tanks, and only when located indoors. We suggest using the M-Thane 70 primer and finishing with the M-Epox 50-SB or M-Epox 60-SB enamel, which are available in our Industry range.

As long as it is not going to be in constant or sporadic contact with water, any product suitable for tiles can be used. Fora professional finish, we recommend Acripol.

If you want to use a lime paint, there is no need to use a primer beforehand. If you want to finish with any other type of paint, apply a primer to the substrate.

We recommend using the MontoSport product. 

PVC is a material that is difficult to adhere to, so we recommend using a multipurpose paint after first performing an adhesion test.

It’s is a material that is difficult to adhere to, so we recommend using a multipurpose paint after first performing an adhesion test.

It’s is a material that is difficult to adhere to, so we recommend using a multipurpose paint after first performing an adhesion test.

Polyester is a material that is difficult to adhere to, so we recommend using a multipurpose paint after first performing an adhesion test.

It’s is a material that is difficult to adhere to, so we recommend using a multipurpose paint after first performing an adhesion test.

We do not have any recommended product for this type of substrate.

If the material is galvanised or aluminium, we recommend using a multipurpose paint.

If the substrate is microcement, use a multipurpose paint.

The surface of polyurea is inert and rigid in nature, so we recommend using polyurethane after testing first.