Single-component clear finishing varnish. For direct use on concrete and stamped concrete as a protective, dust-repellent, and curative impregnating agent.

Semi Gloss
8 - 12 m²/L
Drying time
30 min
15L 4L


  • Outdoor/Indoor
  • Moulded concrete
  • Concrete
  • As a primer for sealing porous surfaces
  • Cement mortars
  • The resistance and durability of the product for floor are proportional’s to the aggressiveness that could suffer

How to apply?

  • Air-less gun
  • Aerographic gun
  • Brush, Roller


Remove until perfect homogenization.
Apply on dry supports affluent.
When applying the product on Pavimont, avoid mixing with the Pavimont either use spray equipment or if applying the product with brush or roller, keep the number of strokes to the minimum to prevent the varnish from softening and mixing with the Pavimont.
Verify possible bled on asphalt surfaces and case of existing, please consult with our Technical Department.
Humidity of flooring: maximum of 4% measured at a depth of 2cm.
Soporte Nuevo:
Correct pavement preparation is essential. Surface should be completely dry (30 days minimum). Remove off any efflorescences. Pavement must be adjusted and if necessary increased, to obtain uniformity and make a perfect treatment. Support must be in optimal conditions of cleaning (free of strange products) and perfectly dry.
Remove off any trace of oils or greases.
The mechanical treatment of the ground (shotpeened) solves the problems of impermeability as well as dirt. In some cases a chemical treatment of caustic soda solution 20% eliminating fats and oils and later treatment with 20% hidrochloric acid to eliminate impermeability (to open pore) and rinse, may be enough.
Pavement surface should be porous enough to achieve perfect adhesion.
Asphaltic surfaces:
-Apply properly after removing foreign products.
- Never apply this product at high temperatures to avoid product bleeding.
-There should not be any asphaltic plastifiers migration. If doubts before chemical application, please consult our Technical Department. Restauracion y Mantenimineto:
Eliminate old paintings in badly state or badly adhered by means of the traditional methods of mechanical pickling (shotpeened) or chemistry (Quitamont).
Verify that the adhesion between old paintings good anchored and the new ones is perfect and does not deteriorate the adhesion of old paintings on the substrate.
If one eliminates paintings, to follow habitual the procedure indicated in new supports



I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.