Water-based varnish, made with latest technology acrylic emulsions, for varnishing, protecting and decorating all types of interior wood.
10 - 15 m²/L
Drying time
(20ºC HR:60%): 1 - 3 h
0.5L 2.5L


  • Indoors
  • Exterior with protection.
  • Ideal for general carpentry.
  • Wood
  • Plaster
  • Cement
  • Suitable for furniture and doors
  • Brick
  • Concrete
  • Apply a maximum of 275 +/- 25 g/m2
  • Use over clean woods

How to apply?

  • Air-mix gun
  • Aerographic gun
  • Brush, Roller


Colorless, Oak, Walnut, Chestnut, Teak, Mahogany.
- Stir the product until it is perfectly homogenized.
- Apply on clean and dry substrates.
- Apply following the dilutions recommended in the Application Systems section.
- Pre-sand to guarantee a good penetration and leveling on the wood.
- In the first hand, it is advisable to prime preferably with Crea Impregnante.
- Do not apply the product at high temperatures, or on surfaces exposed to strong insolation.
- Maintain good ventilation conditions during the drying time.
- Do not apply with relative humidity higher than 80%
Soporte Nuevo:
New wood:
- The support must be free of any remaining product or residue.
- Apply in which the moisture content is less than 20%.
- Apply on healthy, well degreased, dust-free and dry wood.
- Sand and remove any remaining bonding glue.
- If the wood shows signs of aging, sand in advance, then remove the dust with a brush. Restauracion y Mantenimineto:
Varnished or painted wood:
- If the wood has been varnished with open pore stains: remove the remains of old products, remove badly adhered or in poor condition, sand lightly, remove dust after sanding and then proceed as in new wood.
- If the wood has been varnished with closed-pore varnishes or another similar product, sand well and, if necessary, remove the product by stripping or using mechanical means, then proceed as in new wood.
- If the wood has been varnished with cellulose or polyurethane varnishes, remove them by stripping or mechanical means, then proceed as in new wood.
- If the wood has been lacquered with synthetic lacquers, remove them by pickling or using mechanical means, sand to the wood, then proceed as in new wood.



I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.