CREA LASURE SATINADO

- Stir the product until it is perfectly homogenized.
- Apply on clean and dry substrates.
- Apply following the dilutions recommended in the Application Systems section.
- Pre-sand to guarantee a good penetration and leveling on the wood.
- In the first hand, it is advisable to prime preferably with CREA Impregnante.
- Do not apply the product at high temperatures, or on surfaces exposed to strong insolation.
- Maintain good ventilation conditions during the drying time.
- Do not apply with relative humidity higher than 80%

Soporte Nuevo:
New woods.
- Outdoors, protect the wood with Klearxyl Di Anticarcomas from attack by fungi and xylophagous insects.
- The support must be free of foreign products and / or residues.
- Apply on wood with a moisture content of less than 20%.
- Apply on healthy, well-degreased, dust-free and dry woods.
- Sand and eliminate possible glue residues in the assemblies and machining failures.
- If the wood shows signs of aging, it must be previously sanded and dust removed by brushing or any other mechanical means.
- Applying the CREA LASURE SATINADO in the exposed conditions, and following the indications of restoration and maintenance, the product can provide the wood with a protection of maximum observed resistance of up to 7 years. Always, depending on the location / area, conditions and attacks to which the varnished wood is subjected. Restauracion y Mantenimineto:
Varnished or painted woods:
- If they have been varnished with open-pore lasures: Remove foreign products, remove poorly adhered or poorly maintained areas, sand lightly, remove the dust resulting from sanding and proceed as on new woods.
- If they have been varnished with closed pore varnishes or the like, sand thoroughly and if necessary remove by stripping or by mechanical means and proceed as on new woods.
- If they have been varnished with cellulose or polyurethane varnishes, remove by stripping or by mechanical means and proceed as on new woods.
- If they have been enameled with synthetic enamels, remove by pickling or by mechanical means, sand until wood is reached and proceed as on new woods.
- Outdoors, protect the wood with Klearxyl Di Anticarcomas from attack by fungi and xylophagous insects.
- In parts already varnished with CREA LASURE SATIN FINISH and in order to maintain all their protective efficacy, it is advisable to periodically check the condition / appearance of the surfaces. If deterioration is observed, by impacts and / or scratches, etc. We recommend sanitizing and sanding the damaged area and coating with CREA LASURE SATINADO.