MICROCEMENT SEALER

• Stir the product until it is perfectly homogeneous.
• Respect the curing time of MICROCEMENT Ó Deco. We recommend waiting for 48 hours. - The substrate's humidity should be below 4%.
• Apply on clean and dry substrates.
• Do not apply the product at high temperatures or on surfaces exposed to strong sunlight.
• Do not apply with relative humidity higher than 80%.
• Short-haired roller.
• Consumption: 0.06 L/m2 per coat. On Floors and Walls finishes, apply 1 coat. - Make sure to wet the entire surface to remove all air and prevent bubbles from forming when varnishing with the finish.
• On Rustic finish, apply 2 coats.
• Drying time: minimum 4h, maximum 24h for recoating.
• Essential to finish with Microcement Protector (2K) or Microcement Protector Deco (1K).

New substrate:

On MICROCEMENT Ó Deco cementitious coating:

• Depending on environmental conditions, wait at least 24 hours after applying Microcement Ó Deco. The substrate must be dry, clean, free of dust, and oils.
• Remove large irregularities (burrs) by brushing or sanding with coarse-grit sandpaper.
• Condition with medium-grit sandpaper (150-220).
• Remove the generated dust by blowing with compressed air.
• Vacuum thoroughly, using a fine brush if necessary.

Restoration and Maintenance: