PAVIKRIL

• Shake the product until it is perfectly homogeneous.
• Dilute the product based on the porosity and condition of the substrate in the first coat.
• Finish with one or more slightly diluted coats until complete coverage of the substrate.
• Do not apply the product at temperatures below 5ºC or on surfaces exposed to strong sunlight.
• It is very important that when applying over old paints, they are perfectly adhered to the substrate and check their adhesion.
• It is also essential that the substrate's pores are open enough for a perfect bond.
• Pavement moisture: a maximum of 4%, measured at a depth of 2cm.
• For painting stripes, use Massima Fachadas.

New Surface:

Cement Mortars:

1. Wait for a minimum of 30 days for complete curing.

2. Clean any efflorescence with abrasive blasting.

3. Neutralize alkaline surfaces.

4. For polished surfaces, sand to open the pores.

5. Clean the surface of any foreign substances.

6. Secure deteriorating substrates with Fijamont.

7. Fill defects in the substrate with an appropriate product.

Restoration and Maintenance:

1. Completely remove old paint that is in poor condition or poorly adhered.

2. Matte down shiny surfaces to ensure good adhesion.

3. For painted surfaces, check the strength and adhesion of the paint, diagnose its nature to avoid potential incompatibilities, and remove dust and dirt before repainting.

4. Fill defects in the substrate with an appropriate product.

5. On walls with mold, treat them beforehand with Montolimp.