OVALDINE ANTIFISURAS

• Do not apply the product at temperatures below 5ºC or above 35ºC or in imminent rain.
• Avoid applying in full sun or on excessively humid days.
• Shake the product until thoroughly homogeneous.
• Dilute the product based on the porosity and condition of the substrate in the first layer.
• Finish with two or more slightly diluted layers until total coverage of the substrate.

New Substrate:

Concrete and cement mortars:

1. Wait for complete curing, a minimum of 30 days.
2. Clean possible efflorescence with abrasive blasting.
3. Neutralize alkaline surfaces.
4. On polished surfaces, sand to open the pores.
5. Clean the substrate of foreign substances.
6. Fix friable substrates with a suitable fixative (Fijamont or Emulsion Fijadora).
7. Fill defects in the substrate (Plasmont Exteriores or equivalent from the Montó range).

Porous bricks:

1. Eliminate any cracks, holes, or irregularities with Plamont Exterior or equivalent from the Montó range.
2. Clean the surface before painting.
3. It is advisable to apply a primer before painting, considering the porosity of the brick to avoid excessive paint consumption.

Restoration and Maintenance:

1. For painted substrates, check the solidity and anchoring of the paint, diagnose its nature to avoid possible incompatibilities, and remove dust and dirt before repainting.
2. Completely remove old paints in poor condition or poorly adhered.
3. Treat substrates with mold using Montolimp.
4. Glossy surfaces should be toned down to ensure good adhesion.
5. Fill defects in the substrate with exterior plaster (see Family 6 PREPARACIÓN DE FONDOS, the lines corresponding to powdered plasters and prepared putties to make an appropriate choice).