MONTOXYL ULTRA SATINADO

Stir the product until it is evenly mixed.
Apply straight from the container, spreading it as thinly as possible (thin coats)Do not apply the product at high temperatures or on surfaces in strong sunlight.
Keep the area well-ventilated while drying.
Do not apply in relative humidity over 80%.

Soporte Nuevo:
New woods:
1. Outside, to protect the wood with Anticarcomas KLEARXYL DI of the attack of fungi, algae and insects.
2. Ensure the surface is free of foreign matter and/or residue.
3. Apply on wood with less than 20% moisture content.
4. Apply on sound, dry wood, free of grease and dust.
Old woods:
1. Outside, to protect the wood with Anticarcomas KLEARXYL DI of the attack of fungi, algae and insects.
2. Sand and remove possible glue traces in joints and faulty milling.
3. If the wood shows signs of ageing it should be sanded and the dust removed with a brush or other mechanical means.
4. With a paint gun: we recommend the Airless System. Restauracion y Mantenimineto:
Varnished or painted wood:
1. If previously varnished with Lasure type products such as matt or satin Montoxyl, remove foreign products, eliminate areas of flaking or areas in poor condition, gently sand, remove the dust from sanding, and proceed as for new wood.
2. If previously varnished with flexible and penetrating protective products such as Montoxyl Ultra, remove foreign products, eliminate areas of flaking or areas in poor condition, gently sand, remove the dust from sanding, and proceed as for new wood3. If previously varnished with closed pore varnish such as Universal Matt, Satin or Gloss synthetic varnish, Barniz Velero, Barniz Alta Montaña or similar, remove it by stripping with Quitamont Universal or by mechanical means, and proceed as for new wood, if there is any blistering, peeling or cracking. If the surface is in good condition, gently sand, remove the dust from sanding and proceed as for new wood.
4. If previously varnished with cellulose or polyurethane varnish, remove by stripping with Quitamont Universal (Code: 3510) or mechanical means, and proceed as for new wood.
5. If they have been painted with synthetic enamel such as Montosintetic, Marisma, Luxatín or similar, remove it by stripping with Quitamont Universal or mechanical means, and proceed as for new wood.