MONTOXYL CLASSIC MATE

Soporte Nuevo:
New wood:
1. The base must be free from foreign materials and/or waste matter.
2. Apply to wood with a moisture content of less than 20%.
3. Apply to wood which is healthy, dry and free from grease and dust.
Old wood1. Sand down and remove any remnants of glue from the joints and defects from mechanical process.
2. If the wood shows signs of ageing it must first be sanded down and any dust removed using a plane or other mechanical device.
3. By using a paint gun the most highly recommended is the Airless System. Restauracion y Mantenimineto:
Varnished or painted wood:
1. If the wood has been varnished using Montoxyl matt or satin type lasures, remove foreign materials, remove any varnish which is loose or in poor condition, gently sand down, remove the sanding dust and proceed as with new wood.
2. If the wood has been varnished using Montoxyl type flexible and penetrating protectors, remove foreign materials, remove any varnish which is loose or in poor condition, gently sand down, remove the sanding dust and proceed as with new wood.
3. If it has been varnished using a closed pore varnish like Barniz Sintético Universal Matt, Satin or Gloss, Barniz Velero, Barniz Alta Montaña o similar, strip down with Quitamont Universal or by mechanical means and proceed as with new wood if blisters or cracks have appeared or edges are raised. If the surface is in good condition, gently sand down, remove the sanding dust and proceed as with new wood.
4. If the wood has previously been varnished with cellulose or polyurethane varnishes, strip down using Quitamont Universal (Code: 3510) or by mechanical means and proceed as with new wood.
5. If the wood has been enamelled with a synthetic enamel such as Montosintetic, Marisma, Luxatín or similar, strip down with Quitamont Universal or by mechanical means and proceed as with new wood.