MONTOXYL LASURE ACQUA SATINADO

-Stir product completely.
-Only apply on clean and dry surfaces.
-Dilute product according to application system recommendations.
-Surface should be sandpapered previously to ensure good product penetration and wood levelling.
-For the first coat, it is recommended to prime with Fondo Lasure Acqua. -Do not apply at high temperatures or on overheated surfaces exposed to sunshire.
-Keep room well ventilated while product is drying.
-Do not apply when moisture content is over 80%.

Soporte Nuevo:
New wood1.
- On the outside, protect the wood with Klearxyl Di Anticarcomas from the attack of fungi and xylophagous insects.
2.
- Surface should be free of any foreing products or remains.
3.
- Apply on wood with less than 20% moisture content.
4.
- Apply on wood in good condition, dry and free of grease and dust.
5.
- Sandpaper and eliminate any remains in joints and mechanical faults.
6.
- Old wood should be previously sandpapered and dust-free. Restauracion y Mantenimineto:
Painted or varnished surfaces:
-If they have been varnished with Barniz Lasure Acqua or Montoxyl Color, remove off foreign remains, or areas in bad condition, sandpaper slightly, brush any resulting dust and proceed as per new wood.
-If the have been varnished with close pore varnishes or similar apply a stripping product or use a mechanical system if any blisters or cracks have arisen and proceed as per new wood. If surfaces are in good condition, sandpaper slightly, brush any resulting dust and proceed as per new wood.
-If they have been varnished with cellulose or polyutherane based varnished, apply a stripping product or use a mechanical system and proceed as per new wood.
-If they have been painted with synthetic enamels apply a stripping product or use a mechanical system and proceed as per new wood.
- On the outside, protect the wood with Klearxyl Di Anticarcomas from the attack of fungi and xylophagous insects. - In pieces already varnished with MONTOXYL LASURE ACQUA SATINADO and in order to maintain all its protective efficiency, it is advisable to periodically check the state / appearance of the surfaces. If deterioration is observed, due to impacts and / or scratches, etc. We recommend to clean and sand the damaged area and restore with MONTOXYL LASURE ACQUA MATE.