MONTOXYL LASURE ACQUA ACABADO PIGMENTADO

-Stir product completely.
-Only apply on clean and dry surfaces.
-Dilute product according to application system recommendations.
-Surface should be sandpapered previously to ensure good product penetration and wood levelling.
-Keep room well ventilated while product is drying.
-Do not apply at high temperatures or on overheated surfaces exposed to sunshire.
-Do not apply when moisture content is over 80%.

Soporte Nuevo:
New wood-Surface should be free of any foreing products or remains.
-Apply on wood with less than 20% moisture content.
-Apply on wood in good condition, dry and free of grease and dust.
-Sandpaper and eliminate any remains in joints and mechanical faults.
-Old wood should be previously sandpapered and dust-free. Restauracion y Mantenimineto:
Painted or varnished surfaces:
-If they have been varnished with Montoxyl Color (ref. 1300), remove off foreign remains, or areas in bad condition, sandpaper slightly, brush any resulting dust and proceed as per new wood.
-If the have been varnished with close pore varnishes such as Barniz Sintetico Universal Mat (ref. 1350), Satinado (Ref. 1360 or Brillante (Ref. 1370), Barniz Velero (ref. 1380), Barniz Alta Montaña (ref. 1385) or similar, apply a stripping product such as Quitamont Universal (ref. 3510) or use a mechanical system if any blisters or cracks have arisen and proceed as per new wood. If surfaces are in good condition, sandpaper slightly, brush any resulting dust and proceed as per new wood.
-If they have been varnished with cellulose or polyutherane based varnished, apply a stripping product such as Quitamont Universal (ref. 3510) or use a mechanical system and proceed as per new wood.
-If they have been painted with synthetic enamels (such as Montosintetic ref. 2020, 2024), Marisma (ref. 2010, 2014), Luxatin (ref. 2028) or similar, apply a stripping product such as Quitamont Universal (ref. 3510) or use a mechanical system and proceed as per new wood.