Home / Products / Madera / Mueble (lacas nitro) / MONTOLAC BRILLO TRANSP. CM-40

    • MONTOLAC BRILLO TRANSP. CM-40

    Nitrocellulose lacquer gloss finish, transparent, fast drying, high hardness and excellent touch.
    Use
    Indoors
    Finish
    Gloss
    Drying time
    10-20 min
    Formats
    25L 5L 0.75L
    I´m interested in this product

    applications

    • Indoors
    • Wood
    • Wood after priming
    • Product for exclusive use in industries regulated by Directive 2010/75 Chapter V.

    How to apply?

    • Painting brush
    • Aerographic gun
    • Brush, Roller
    - Stir the product until perfectly blended.
    -Dilute the first coat adequately to obtain good penetration into the substrate.
    -On very porous or smooth bases, it is advisable to increase dilution.
    -Coat thickeners greater than those indicated in the performance section must not be applied, 10-20 m2/L.
    -Do not apply the product at high temperatures nor to surfaces exposed to strong insolation.
    -Ensure good ventilation while product is drying.
    -Do not apply in relative humidity of over 75-80%. Excessive moisture can cause "whitenings".
    -Respect the minimum time between coats in order to prevent mixing.
    - Preferably applied to Montolac Fondo CM-1 (Cód.
    1500) or Montopol Fondo MS-1 (Cód.
    1600).
    Soporte Nuevo:
    - New wood:
    - The base must be free from foreign materials and/or waste matter.
    - Apply to wood with a moisture content of less than 12%.
    - Apply to healthy wood that is dry and free from grease and dust.
    - Sand down and remove any remains of glue in joints and defects from mechanical processes.
    - If the wood shows signs of aging must be pre-sanded and removing dust by brushing or other mechanical means. Restauracion y Mantenimineto:
    - Varnished or painted wood:
    - If the wood has been varnished with varnishes or paints that have been diluted with white spirit, turpentine, imitation turpentine or solvents for synthetics and oils, these must be removed using a universal stripper or by employing mechanical means, until the new wood is reached.
    - In case of doubt, remove previous varnish.
    - If it is applied to nitrocellulosic or polyurethane varnish, sand to open the pore, remove the resulting dust using a brush and re-varnish.
    - In any case, check the adhesion on the previous varnish, and in case of doubt, remove it.
    - If silicone-based domestic cleaning products have been used for maintenance, it is advisable to sand the wood until they have been completely removed.

    Downloads

    Data sheet

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de MONTOLAC BRILLO TRANSP. CM-40 Gloss