MONTOLAC SATINADA BLANCA CM-70

- Stir the products until perfectly blended.
- Properly dilute the first coat to get a good leveling.
-They should never be applied thicknesses exceed the corresponding to 12-14m2 / l as described in Section Performance.
- Do not apply the product at high temperatures nor to surfaces exposed to strong insolation.
- Ensure good ventilation while product is drying.
- Do not apply in relative humidity of over 75-80%. Excessive moisture can cause "whitenings".
-Respect the minimum time between coats in order to prevent mixing.
-This Product can be re-varnishing with synthetic varnishes.
- The base must be free from foreign materials and/or waste matter.
- Apply to wood with a moisture content of less than 12%.
- Apply to healthy wood that is dry and free from grease and dust.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
- If the wood shows signs of aging must be pre-sanded and removing dust by brushing or other mechanical means.

Soporte Nuevo:
New wood:
-The base must be free from foreign materials and/or waste matter.
- Prime with the right products.
- Apply to wood with a moisture content of less than 12%.
- Apply to healthy wood that is dry and free from grease and dust.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
- If the wood shows signs of aging must be pre-sanded and removing dust by brushing or other mechanical means. Restauracion y Mantenimineto:
-Varnished or painted wood:
- If the wood has been varnished with varnishes or paints that have been diluted with white spirit, turpentine, imitation turpentine or solvents for synthetics and oils, these must be removed using a universal stripper or by employing mechanical means, until the new wood is reached.
- If in doubt remove the varnish, lacquer or enamel above.
- If applied on nitrocellulose varnish or polyurethane sand to open the pore, remove the resulting dust with a brush and re-varnish.
- In any case, check the adhesion on the previous varnish, and in case of doubt, remove it.
- If silicone-based domestic cleaning products have been used for maintenance, it is advisable to sand the wood until they have been completely removed.