MONTOPOL FONDO BLANCO 50

-Stir product completely.
-Mixed up within given proportions.
-Do not apply product in layers too thick which may exceed 140 g/m2 wet per coat.
-No sandpapering is necessary between coats, but it is advisable in the case of wood prone to raise hair or to ensure a good adherence level.
-Always sandpaper before applying finishing coat.
-Do not apply product at high temperatures or on overheated surfaces exposed to sunshine.
-Keep room well ventilated while product is drying.
-Do not apply when moisture content is 80%. -Ensure that MONTOPOL MS hardener is totally transparent before performing mixture.
- For porous wood, dilute the product so it penetrates the pore and so that bubbles do not appear.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
-Minimum time given between coats must be observed to avoid brittle surfaces.
-Maximum time given between coats must be observed at all times.

Soporte Nuevo:
New wood:
- The base must be free from foreign materials and/or waste matter.
- Apply to wood with a moisture content of less than 12%.
- Apply to healthy wood that is dry and free from grease and dust.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
- If the wood shows signs of aging must be pre-sanded and removing dust by brushing or other mechanical means. Restauracion y Mantenimineto:
Varnished or painted wood:
- If the wood has been varnished with varnishes or paints that have been diluted with white spirit, turpentine, imitation turpentine or solvents for synthetics and oils, these must be removed using a universal stripper or by employing mechanical means, until the new wood is reached.
- In case of doubt, remove previous varnish.
-If applied on real polyurethane varnish (using polyurethane based solvent for its thinning), open pore by sandpapering, brush off resulting dust and apply varnish again.
-Check adherence level on previous varnish. If necessary, remove it.
-Should silicone based cleaning products have been applied for maintenance, scrape off surface as necessary.