BARNIZ ALTA MONTAÑA

- Stir the product until its perfect homogenization.
- Adequately dilute the first coat to achieve good penetration into the substrate.
- It can be applied without the need to sand between coats, although it is advisable to proceed with a soft sanding in order to guarantee a perfect adherence and especially in the case of woods with a tendency to repel.
- Likewise, to obtain a silky finish, it is also advisable to sand before the last coat.
- It is advisable to previously prime with Montoxyl Fondo (Code: 1301).
- Do not apply the product at high temperatures, or on surfaces exposed to strong sunlight.
- Maintain good ventilation conditions during the drying time.
- Do not apply with relative humidity higher than 80%.
- If this product is tinted with Montotinte Universal or with the Cromiservice System, use this stain as a background, following the direction of the veins and diluting appropriately.
- Homogenize regularly during the painting process.
- The tinting considerably increases its resistance to U.
V.

Soporte Nuevo:
New woods:
-Outside, protect the wood with Anticarcomas Klearxyl Di from the attack of fungi and xylophagous insects.
-The support must be free of foreign products and / or residues.
-Apply on wood with a moisture content of less than 20%.
-Apply on healthy woods, well degreased, dust-free and dry.
-Sanding and eliminating possible glue residues in assemblies and machining failures.
-If the wood shows signs of aging, it must be previously sanded and dust removed by brushing or any other mechanical means.
-The primer with Montoxyl Fondo is recommended (Code: 501301). Restauracion y Mantenimineto:
-Varnished or painted woods:
-If they have been varnished with Montoxyl Fondo (Code: 1301) remove foreign products, remove areas that are poorly adhered or in poor condition, sand lightly, remove the dust resulting from sanding and proceed as on new wood.
-If they have been varnished with Montoxyl Color (Code: 1300) remove foreign products, remove areas that are poorly adhered or in poor condition, sand lightly, remove the dust resulting from sanding and proceed as on new wood.
-If they have been varnished with closed pore varnishes such as Matt Universal Synthetic Varnish (Code: 1350), Satin (Code: 1360) or Glossy (Code: 1370), Sailboat Varnish (Code: 1380), High Mountain Varnish (Code: 1385 ) or similar, remove by stripping with Quitamont Universal (Code: 3510) or by mechanical means and proceed as on new wood in case of blisters, lifting of edges or cracks. If the surface is in good condition, sand lightly, remove the dust resulting from sanding and proceed as with new wood.
-If they have been varnished with cellulosic or polyurethane varnishes, remove by stripping with Quitamont Universal (Code: 3510) or by mechanical means and proceed as on new wood, if there have been blisters, lifting of edges or cracks. In the case of polyurethanes and if the surface is in good condition, sand lightly, remove the dust resulting from sanding and proceed as with new wood.
-If they have been enameled with synthetic enamel (Montosintetic Code: 2020, 2024) Marisma (Code: 2010, 2014), Luxatín (Code: 2028) or similar, remove by stripping with Quitamont Universal (Code: 3510) or by mechanical means and proceed as on new woods.
-Outside, protect the wood with Anticarcomas Klearxyl Di from attack by fungi and xylophagous insects.
-In any case, adherence to old paints must be checked.