Two-component transparent polyurethane varnish, for satin finishes, with excellent touch, hardness and fast drying. It stands out for its value for money and its fast drying.
12 - 20 m²/L
Drying time
15-30 min
25L 5L


  • Indoors
  • Wood
  • Wood with sealer, and sanded
  • Product for exclusive use in industries regulated by Directive 2010/75 Chapter V.

How to apply?

  • Painting brush
  • Roller
  • Air-less gun
  • Air-mix gun
  • Aerographic gun


- Stir the products until perfectly blended.
- Mix without modifying under any circumstances the proportions of part A (MOTOPOL TRANSPARENTE MATE 19) and of part B (MONTOPOL HARDENER)- Dilute appropriately and leave to rest for a few minutes.
- They should never have layer thicknesses greater than 130 g/ m2 wet per hand.
- Do not apply the product at high temperatures or on surfaces exposed to strong insolation.
- Ensure good ventilation while product is drying.
- Do not apply in relative humidity over 80%.
- Before mixing, make sure that the MONTOPOL HARDENER is completely transparent.
- Respect the minimum time in order to prevent stirring.
- Respect the maximum time between coats in order to prevent adhesion problems.
Soporte Nuevo:
New wood:
- Apply to wood primed with polyurethane base from the Montopol Range.
-The base must be free from foreign materials and/or waste matter.
- Apply to wood with a moisture content of less than 20%.
- Apply to healthy wood that is dry and free from grease and dust.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
- Apply once the polyurethane base is evenly absorbed. Restauracion y Mantenimineto:
Varnished or painted wood:
- If the wood has been varnished with varnishes or paints that have been diluted with white spirit, turpentine, imitation turpentine or solvents for synthetics and oils, these must be removed using a universal stripper or by employing mechanical means, until the new wood is reached.
- If it is applied on top of polyurethane varnish (polyurethane solvent is recommended for diluting it), sand to open the pore, remove the resulting dust with a brush and re-varnish.
- In any case, check the adhesion on the previous varnish, and in case of doubt, remove it.
- If silicone-based domestic cleaning products have been used for maintenance, it is advisable to sand the wood until they have been completely removed.


I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.