MONTOPOL BLANCO MATE 60

- Stir product completely.
- Mixed up within given proportions.
- Do not apply product in layers too thick which may exceed 130 g/m2 wet per coat.
- Always sandpaper before applying finishing coat.
- Do not apply product at high temperatures or on overheated surfaces exposed to sunshine.
- Keep room well ventilated while product is drying.
- Do not apply when moisture content is 80%.
- Ensure that MONTOPOL HARDENER NA is totally transparent before performing mixture.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
- Minimum time given between coats must be observed to avoid brittle surfaces.
- Maximum time given between coats must be observed at all times.

Soporte Nuevo:
New wood:
- The base must be free from foreign materials and/or waste matter.
- Apply to wood with a moisture content of less than 12%.
- Apply to healthy wood that is dry and free from grease and dust.
- Sand down and remove any remains of glue in joints and defects from mechanical processes.
- If the wood shows signs of aging must be pre-sanded and removing dust by brushing or other mechanical means. Restauracion y Mantenimineto:
Varnished or painted wood:
- If the wood has been varnished with varnishes or paints that have been diluted with white spirit, turpentine, imitation turpentine or solvents for synthetics and oils, these must be removed using a universal stripper or by employing mechanical means, until the new wood is reached.
- In case of doubt, remove previous varnish.
- If it is applied to polyurethane varnish, sand to open the pore, remove the resulting dust using a brush and re-varnish.
- In any case, check the adhesion on the previous varnish, and in case of doubt, remove it.
- If silicone-based domestic cleaning products have been used for maintenance, it is advisable to sand the wood until they have been completely removed.