Home / Products / Façade coatings / Silicate coatings / OVALDINE SILICATO

    • OVALDINE SILICATO

    Smooth silicate coating, for protecting and decorating façades and exterior walls. Deep mineral matt appearance that conceals imperfections. Stops the spread of mould. It provides high durability and resistance on mineral substrates where maximum adherence and breathability is obtained, avoiding the accumulation of dampness and the formation of blisters and flaking. Ideal for professional application: high coverage, high performance, low gloss and fast execution.This product contributes to LEED®, BREEAM® and VERDE certifications.
    Use
    Outdoors/Indoors
    Finish
    Smooth matt
    Performance
    6 - 8 m²/L
    Drying time
    (20ºC HR: 60%):2h
    Formats
    12L
    I´m interested in this product

    applications

    • Outdoors/Indoors
    • Facades
    • Stone
    • Cement mortars
    • Lime Mortars
    • Restoring historic centres
    • Mineral media
    • Concrete

    How to apply?

    • Painting brush
    • Roller

    Colors

    White 103 Colors consult COF and ETERNA charts
    It always must be applied on mineral supports of construction.
    To shake the product until its perfect homogenization.
    To print the support with PRIMER SILICATE diluted with water based on the porosity and state of the support.
    To dilute the product with PRIMER SILICATO pure or mixed with water based on the porosity of the support.
    You will put two or three coats of OVALDINE SILICATE in fine layers and without reviewing in humid. Do not apply the product in inferior temperatures to 5º C nor humidity superior to 80%.
    To avoid to paint on surfaces exposed to a strong sun.
    In very absorbent supports to apply a coat of PRIMER SILICATO and 24 hours later 2-3 coats of OVALDINE SILICATO with 12-24 intervals hours.
    In little absorbent supports to apply 2-3 coats of OVALDINE SILICATO .
    Soporte Nuevo:
    Apply on clean and dry surfaces.
    On very porous surfaces regulate absorption with Primer Silicato.
    On gypsum surfaces prime with Fixing emulsion. Restauracion y Mantenimineto:
    1. Completely remove old paint as the silicate must be in contact with the mineral support for the petrification reaction (solidification)2. On mouldy surfaces apply Montoplimp and remove remaining mould.
    3. Glossy surfaces should be thinned out to ensure good adhesion.
    4. Putty the surface defects with exterior filler (see product range 6 ‘SURFACE PREPARATION’ for the corresponding product lines of powder fillers to make an adequate choice).
    5. On surfaces with different textures (repairs and/or plasters) prime to obtain uniform absorption.

    Certifications

    Downloads

    Data sheet

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de OVALDINE SILICATO Smooth matt