MONTOKRIL LISO BLANCO

- Do not apply the product at temperatures below 5ºC or above 35ºC or with the risk of imminent rain.
- Do not apply in full sun or on excessively humid days.
- Shake the product until it is perfectly homogenized.
- Dilute the product depending on the porosity and state of the support in the first layer.
- Finish with two or more layers slightly diluted until the support is completely covered.

Soporte Nuevo:
Cement mortars:
1. Wait until fully hardened (min. 30 days).
2. Clean any efflorescence with an abrasive jet.
3. Neutralise alkaline surfaces.
4. On polished surfaces: Sand down to open the pore.
5. Clean any foreign products from the surface.
6. Use a suitable fixative to fix crumbly bases (Fijamont or Emulsion Fijadora).
7. Fill in any defects/flaws in the base (Plasmont exterior or equivalente of Montó range)Porous bricks:
1. Eliminate any cracks, holes or irregularities with Plasmont Exterior or equivalent, from the Montó range.
2. Clean the surface before painting3. It is advisable to apply a primer before painting, due to the porosity of the brick and thus avoid a high consumption of paint Restauracion y Mantenimineto:
1. On painted substrates, the solidity and anchorage of the paint must be checked, its nature diagnosed to avoid possible incompatibilities, and dust and dirt must be removed before being repainted.
2. Completely remove old paintings in poor condition or poorly adhered3. Treat moldy supports with Montolimp4. Glossy surfaces must be tinted to ensure good adhesion.
5. Putty with Exterior plaster the defects of the support (see in the PREPARACION DE FONDOS family the lines corresponding to powder plasters and prepared putties to make a suitable choice).