Home / Products / Specific use products / Intumescent paints / MONTOFOC ACQUA

    • MONTOFOC ACQUA

    Single component water-based intumescent paint. Generates a protective foam when subjected to intense heat that thermally isolates the base, preventing fire from spreading and slowing down damage to the base.Tested and Certified by independent laboratories according to European Standard EN 13381-8:2010
    Use
    Indoors
    Finish
    Matt White
    Drying time
    1 - 3 hours
    Formats
    20K
    I´m interested in this product

    applications

    • Indoors
    • Exterior with protection.
    • Previously primed iron/steel beams and pillars.
    • Metal structures

    How to apply?

    • Air-less gun
    • Aerographic gun
    • Brush, Roller
    Stir the product until perfectly blended.
    - Do not apply at relative humidity in excess of 80%.
    - Two or three coats are recommended to obtain a thickness of more than 500-600 Micra when dry.
    - Apply as for a water-based paint, except as regards coat thickness, as a thicker coat is more effective.
    - For exterior applications, protect the product with Monto products certified for flame reaction.
    Soporte Nuevo:
    -Treat as usual for the paints and varnishes recommended in the surface/process table. -Each product must be treated according to the chosen primer and suitable intermediate coat.
    - In the case of primers and intermediate coats recommended by PINTURAS MONTO, S. A.
    , the guidelines and waiting times for each product must be followed, as indicated in the technical specification of each product used in the preparation system.
    -Cleaning: Water. Restauracion y Mantenimineto:
    - Completely remove any old paint that is flaking away or in poor condition.
    -Remove foreign products in the usual way.
    -Given that the previous coats may be flaking, it is recommended that they be removed using a heat gun, blasting or by other means.
    - In the case of primers and intermediate coats recommended by PINTURAS MONTO, S. A.
    , the guidelines and waiting times for each product must be followed, as indicated in the technical specification of each product used in the preparation system.
    -Use plaster to fill any defects in the base (to make a suitable selection, see the PREPARING BASES family for lines corresponding to powder plaster and prepared fillers).

    Downloads

    Data sheet

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de MONTOFOC ACQUA Matt White