MONTOSPORT RENOVADOR BORDES PISCINAS

1. Apply on clean and dry surfaces.
2. As it is not film-forming, it may leave a white deposit, and can wear away with use.
3. Apply the first coat of pool surround restorer, diluting the product by 0-30% depending on the porosity of the surface.
4. Leave to dry 24 hours before applying the second coat.
5. Apply a second coat.
6. Let the application cure at least one week before filling the pool or letting the surface get wet.
7. Apply when the stone is cool, never when warm or in full sun.
8. We recommend repainting, following the advice in the section Preparation and Surface, at least once a year.

Soporte Nuevo:
1. Clean the surface thoroughly and roughen the surface, preferably with traditional mechanical methods, and if this is not possible, by chemical means (diluted hydrochloric acid).
2. Rinse with plenty of water if using hydrochloric acid.
3. Allow to dry.
4. Apply the first coat of pool surround restorer, diluting the product by 0-30% depending on the porosity of the surface and the means of application. It is always preferable for the first coat to be as diluted as possible, so it soaks into the surface completely.
5. Leave to dry 24 hours before applying the second coat.
6. Let the application cure at least one week before filling the pool or letting the surface get wet.
7. Apply when the stone is cool, never when warm or in full sun.
8. We do not recommend using any product to prepare the surface.
9. Apply a maximum of 5m2/L counting both the recommended coats. Restauracion y Mantenimineto:
1. Eliminate the old paint completely using mechanical methods (blasting or similar).
2. Apply the first coat of pool surround restorer, diluting the product by 0-30% depending on the porosity of the surface. It is always preferable for the first coat to be as diluted as possible, so it soaks into the surface completely.
3. Leave to dry 24 hours before applying the second coat.
4. Apply a second coat.
5. Let the application cure at least one week before filling the pool or letting the surface get wet.
6. Apply when the stone is cool, never when warm or in full sun.
7. We do not recommend using any product to prepare the surface.
8. Apply a maximum of 5m2/L counting both the recommended coats.