FIJAMONT ACQUA
applications
- Outdoors/Indoors
- Weak supports
- Cement mortars
- Plaster
- Concrete
- Fixer, adherence helper, absorption regulation and hardener for porous supports that have been painted with pliolite base paints.
- Universal primer for water base paints
How to apply?
- Painting brush
- Roller
- Air-less gun
- Air-mix gun
- Aerographic gun
- Low preasure turbo
Colors
- Apply on clean and dry substrates.
- Avoid gloss by diluting according to the absorption of the base. Dilution data in the Application System are a good guide.
- First sand the surface in order to guarantee perfect penetration into the substrate.
Do not apply the product at high temperatures or on surfaces exposed to strong insolation.
- Do not apply with relative moisture over 80%.
- Carry out tests before proceeding to the final finish.
Cement mortar, plaster and derivatives:
1. Wait until the base is completely set and dry (minimum 30 days and maximum humidity of 20%).
2. Clean the base of possible efflorescence and wait until fully dry.
3. Remove any foreign products and/or residues from the base.
4. Sand down highly polished surfaces to open up the mortar.
5. Fill with powder or prepared filler plasters to make the right choice, see family 6.
6. It is advisable to apply Fijamont, before and after placing the filler, especially on bases in poor condition.
7. Treat mouldy bases with Montolimp.
Wood:
1. If you want a fungicidal treatment, apply Montoxyl Fondo Incoloro.
2. Fijamont can be applied when repainting is carried out with water-based or solvent-based paints and the fungicide has fully penetrated. Restauracion y Mantenimineto:
1. Completely remove any old paint that is flaking away or in poor condition.
2. Shade brilliant paint to ensure good penetration to the substrate.
3. Remove foreign products by the usual procedures.
4. Given that the previous coats may have come loose, often unnoticed by the operator, it is recommended that old layers be removed using a heat gun, blasting or by other means.
5. Use plaster to fill any defects in the base (In family 6 see PREPARING BASES lines corresponding to powder plaster and prepared fillers to select the right solution).
6. Apply before and after filling.
Downloads
I´m interested in this product
I´m interested in this product
Confirm the product and your contact information to be able to inform you and advise you in a personalized way.
Readily available stock
Gestión automatizada de las ubicaciones y las existencias de los productos.
Perfect orders
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Warehouse management
Ubicación automática de los productos en el almacén mediantes transelevador.
Fast loading
8 loading docks for 24-ton trucks.
Our own transport
Flota propia de camiones de reparto preparados para transporte ADR.
We are always close by
Cadena de tiendas propia y suministro a puntos de venta en toda España.
liter calculator
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de FIJAMONT ACQUA Transparent