Home / Products / Preparations, backgrounds and primers / / MONTO PUENTE DE UNIÓN TACK

    • MONTO PUENTE DE UNIÓN TACK

    Water-based adhesive primer with extended tack. Bonding agent between mortars on absorbent construction surfaces.
    Performance
    6 - 10 m²/L
    Formats
    12L 4L 0.75L
    I´m interested in this product

    Applications

    • Stone
    • Fibre-cement
    • Absorbent supports
    • Plaster finishing
    • Indoors/Outdoors
    • Cement
    • Plaster
    • Concrete
    • Brick
    • Undamaged rough mortar coats.
    • Walls and ceilings
    • Cementitious mortars and anhydrite supports
    • 965

    How to apply?

    • Painting brush
    • Roller
    • Air-less gun
    - Do not use on slabs or floors. Also avoid use on structural joints.
    - Stir the product until completely homogeneous. Then apply with a brush or roller.
    - Apply to clean, dry or slightly damp substrates, but never waterlogged.
    - It is important to control the substrate's absorption rate (approximate consumption of 0.10 - 0.15 kg/m² per coat) and the amount of product to be applied.
    - It is recommended to cover with mortar, concrete, or plaster at least 30 minutes after applying the bonding agent, and at most after 48 hours.
    - Prevent any dust from settling on the primer, as this will reduce its adhesion.
    - Clean tools immediately after use, before the product hardens.
    - In freshly applied mortars, it is necessary to allow the materials to set and dry completely.
    - Clean the substrate of any foreign matter and/or residue.
    - The substrate must be dry, clean, and free of dust, particles, oils, or any other particles that could impair the adhesion of the material to the substrate.

    Downloads

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    Liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de MONTO PUENTE DE UNIÓN TACK