PAVIMONT ACRI-EPOX 1C

Single-component water-based coating formulated with pre-catalyzed Hybrid Acrylic-Epoxy Coating (HAEC) technology. This system offers superior performance compared to conventional single component floor coatings, enabling a rapid return to service.
Finish
Semi-mate
Performance
7 - 10 m²/L
Drying time
10-30 min
Formats
15L 4L

Applications

  • Particularly recommended for painting floors
  • car parks
  • basements ?.
  • - Outdoor / Indoor
  • 970
  • 975
  • 976

How to apply?

  • Painting brush
  • Roller
  • Air-less gun

Colors

White 102
Grey 189
TR Tintable in a tinting system.
- Stir until perfectly homogeneous. Apply to thoroughly dry and clean substrates.
- Substrate moisture content: maximum 4%.
- Apply to thoroughly dry, sound substrates free from contaminants.
- Do not apply at temperatures below 10°C or at relative humidity levels above 75%. Do not apply at high temperatures or to overheated surfaces.
Proper substrate preparation is essential. Allow the concrete to fully cure (minimum 30 days). Remove any efflorescence. The substrate must be sound and, if necessary, repaired or resurfaced to ensure a uniform surface and proper treatment. It must be clean, free from contaminants, and completely dry. Grease and oil must also be completely removed.
The substrate must have sufficient porosity to promote paint penetration and ensure optimum adhesion. The recommended method is mechanical preparation by diamond grinding, bush hammering, or shot blasting. For substrates with moderate porosity, chemical etching using hydrochloric acid (15-30% dilution) followed by thorough rinsing with plenty of water may be effective. In case of doubt, consult our Technical Department before using this treatment.

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.