IBERSAT BASE

Shake product until perfectly homogenized.
This product should be dilluted depending on surface conditon and porosity level.
Finish with one or more coats slighlty dilluted until surface is totally covered.
Do not apply product at temperatures below 5ºC or any surfaces which have been exposed to sunshine.

Soporte Nuevo:
Cement morter:
-Wait till complete drying of product (30 days minimum).
-Remove off any efflorescences by abrasive jet and neutralize alkaline surfaces.
-Extremely polished surfaces should be sanpapered to open pores.
-Remove off any foreing products or remains.
-Use Emulsión Fijadora like primer to prevent “sheen”.
-Cover surface imperfections with Plastmont Exteriores (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Plaster:
-Wait till complete drying of product (20% max. Moisture level).
-Remove off any foreign product or product remains.
-Remove off any efflorescences.
-Use a sealant or matt paste to regulate surface absorption.
-Extremely polished surfaces should be sandpapered to open pore.
-Very damaged surfaces should be fixed with suitable product (See Family 6.
)-Cover surface imperfections with plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Use Emulsión Fijadora like primer to prevent “sheen”.
-Mildewed surfaces should be treated with Montolimp. Restauracion y Mantenimineto:
1. Remove off old paint completely.
2. Brilliant surfaces should be matted to ensure good adherence.
3. Check paint type and anchoring in painted surfaces to avoid incompatibilities. Remove off any dust or dirt before painting.
4.
Cover surface imperfections with suitable putty of plaster (See Family 6 to help you choose the most suitable product to prepare surfaces).
5.
Use Emulsión Fijadora like primer to prevent “sheen”.
6.
Mildewed surfaces should be treated with Montolimp.