SMART PROTECCION TOTAL BLANCA

Shake product until perfectly homogenized.
First coat should be dilluted depending on surface conditon and porosity level.
Finish with one or more coats slighlty dilluted until surface is totally covered.
Do not apply product at temperatures below 5º C or any surfaces which have been exposed to sunshine.
Do not alter the nature of the paint with substances. Do not colour.

Soporte Nuevo:
Cement morter:
-Wait till complete drying of product (30 days minimum).
-Remove off any efflorescences by abrasive jet and neutralize alkaline surfaces.
-Extremely polished surfaces should be sanpapered to open pores.
-Remove off any foreing products or remains.
-Bad condition surfaces should be anchored properly (see family 6).
-Cover surface imperfections with suitable putty or plaster (See Family 6).
-Plaster:
-Wait till complete drying of product (20% max. Moisture level).
-Remove off any foreign product or product remains.
-Remove off any efflorescences.
-Use a sealant or matt paste to regulate surface absorption.
-Extremely polished surfaces should be sandpapered to open pore.
-Very damaged surfaces should be fixed with suitable product (See Family 6.
)-Cover surface imperfections with plaster or putty (See Family 6) Restauracion y Mantenimineto:
1.
Remove off old paint completely,2.
Brilliant surfaces should be matted to ensure good adherence.
3.
Check paint type and anchoring on painted surfaces to avoid incompatibilities. Remove off any dust or dirt before painting.
4.
Cover surface imperfections with suitable putty or plaster (see Family 6 to help you choose the most suitable product to prepare surfaces).
5.
Mildewed surfaces should be treated with Monto Limpia Moho.