Photocatalytic coating that purifies and purifies the interior environment, reducing gaseous pollutants and substances harmful to health (for example formaldehyde or NOx). It also works by breaking down and eliminating bad odors. Certified photocatalytic activity, it acts once the paint film dries and as long as it is kept in good condition. It also offers excellent performance as a decorative paint: smooth matt finish with high coverage and resistance.
14 - 16 m²/L
Drying time
1 hour
12L 4L


  • Indoors
  • Sports centres, indoor swimming pools, changing rooms, etc.
  • Food processing plants, supermarkets, etc
  • Clinics, hospitals, homes for the elderly....
  • Cement, Plaster, Concrete,Brick
  • Old, firmly fixed matt paints
  • Masonry
  • Because of its low emission and low odour properties, it is particularly recommended for indoor use.

How to apply?

  • Painting brush
  • Roller
  • Air-less gun
  • Air-mix gun
  • Aerographic gun
  • Low preasure turbo


White and a selection of colours
Stir the product until perfectly blended.
Do not apply the product when room temperature is under 5ºC or to surfaces exposed to strong sunlight.
Soporte Nuevo:
Cement mortars:
1. Wait until completely set (minimum 30 days)2. Clean off any efflorescence with a sand blaster3. Neutralise alkaline surfaces4. Sand polished surfaces to increase porosity5. Remove foreign products from the base6. Fix crumbling bases with Emulsión Fijadora or Fijamont7. Fill in any defects/flaws in the base (see family 6)Plaster:
1. Wait until the plaster is dry (maximum 20% humidity)2. Remove undesired products from the base3. Clean off any efflorescence with a sand blaster4. Control the absorbency of the base using a sealant, fixative or a diluted coat of the same product. Restauracion y Mantenimineto:
1. Remove any old paint that is flaking away or in poor condition2. Glossy surfaces should be dulled down to improve adhesion3. On painted bases, check the existing paint is in good condition and firmly adhered, diagnose the type of paint to avoid any incompatibility, and remove dust and dirt before repainting.
4. Use plaster to fill any defects in the base (to make a suitable selection, see the PREPARING BASES family for lines corresponding to powder plaster and prepared fillers).
5. Treat mildewed surfaces with Montolimp.

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.