MONTONATURE MATE

Acrylic water enamel of the highest quality, multi-stick for the decoration and protection of a multitude of supports: work, metal, wood, copper, galvanized, pvc,…
Use
Outdoors/Indoors
Finish
Matt
Performance
12 - 14 m²/L
Drying time
1 hour
Formats
12L 4L 0.75L

applications

  • Outdoors/Indoors
  • Stone
  • Work surfaces: cast, cement, gypsum covered brick, plasterboard
  • PVC and plastic (conduct a previous adhesion test)
  • Cement mortars
  • Wood
  • Plaster
  • Previously primed metal: iron, steel, galvanised metal, aluminium, copper, etc.
  • Universal use: can be combined to create the same finish on a wide range of surfaces.
  • Ideal for creating smooth, maximum-performance finishes on walls and ceilings. Also ideal for carpentry in general, furniture, doors, pipes, radiators, etc.

How to apply?

  • Painting brush
  • Roller
  • Air-less gun
  • Air-mix gun
  • Aerographic gun
  • Low preasure turbo

Colors

Bases: White 103, IN, TR. Colours from the Montonature chart and tintometric system Montomix and Colora
-Stir well .
-Only apply on clean surfaces, clean off any dirt by using clean water and detergents.
-Follow guidelines as shown in table below.
-Should it be applied on specific metals, different types of galvanic or difficult surfaces, we recommend priming with Ecoprimer first.
-New wood should be previously primed with Montoxyl Fondo, to prevent surface from fungus and harmul bacteries.
-Do not apply product at high temperatures or overheated surfaces exposed to sunshine.
-Keep room well ventilated while product is drying.
-Do not apply when moisture contents it over 80%.
Soporte Nuevo:
Plaster, cement and derivatives:
1. Wait until fully hardened.
2. Clear possible efflorescence from the base and neutralise alkaline surfaces. Use a suitable filler to eliminate defects in the base.
3. Treat mouldy bases with Montolimp.
New woods:
1. Apply to woods with a moisture content of less than 20%. Healthy, dry wood, well cleaned of dust and grease.
2. If the wood shows signs of ageing, it should first be sanded down, primed and any dust/powder removed through brushing or any other mechanical means.
3. Before application, prime using a suitable product, see Family 5 wood treatments.
Iron and derivatives:
1. Apply to dry bases, well cleaned of dust and grease. If these show signs of oxidation, rust must be removed through brushing or any other mechanical means. Oxifin is also suitable.
2. When this is done, treat using a suitable primer prior to application, see Family 6.
Galvanised and light metals:
1.
- Remove all grease and check the adhesion.
2.
- Priming with Ecoprimer is recommended where necessary. Restauracion y Mantenimineto:
Plaster, cement and painted derivatives:
1. Remove any foreign products and paint that is loose or in poor condition, opening up the grain if necessary through sanding or other mechanical means. Check the adhesion and treat as new.
Varnished or painted woods:
1. If they have been varnished or painted, remove foreign products, remove any loose or peeling varnish or paint, lightly sand, remove dust from sanding and proceed as with new woods.
Iron and enamelled derivatives:
1. On paint in good condition, sand to open the pore, check that the adhesion is perfect.
2. On paintwork in bad condition, remove by mechanical or chemical means and proceed as for new surfaces. When this is done, treat using a suitable primer prior to application, see Family 6.
Galvanised and light metals:
1.
- Remove all grease and check the adhesion.
2.
- Priming with Ecoprimer is recommended where necessary.

Certifications

Downloads

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.