CREA LASURE ULTRA MATE

Systèmes d'application.
- Pré-poncer pour garantir une bonne pénétration et nivellement sur le bois.
- Dans la première main, il est conseillé d'amorcer de préférence avec Crea Impregnante- Ne pas appliquer le produit à des températures élevées ou sur des surfaces exposées à une forte insolation.
- Maintenir de bonnes conditions de ventilation pendant le temps de séchage.
- Ne pas appliquer avec une humidité relative supérieure à 80%.

Soporte Nuevo:
New woods.
When working outside, protect wood from attacks by fungi and xylophagous insects with Klearxyl Di Wood-Borer Treatment.
The base must be free from foreign materials and/or waste matter.
Apply to woods with a moisture content of less than 20%.
Apply to healthy, grease-fee, dust-free and dry wood.
Sand down and remove any remnants of glue from the joints and defects from mechanical process.
If the wood shows signs of ageing it must first be sanded down and any dust removed using a plane or other mechanical device.
When CREA LASURE ULTRA MATE is applied in exposed conditions, following the directions for restoration and maintenance, the product has been observed to provide wood with optimal resistant protection for up to 10 years. This will always depend on the location / area, conditions and punishment to which the varnished wood is subjected. Restauracion y Mantenimineto:
Varnished or painted wood: - If you have varnished with open-pore wood stains such: remove foreign products, remove any loose or peeling varnish, lightly sand, remove dust from sanding and proceed as on new woods. - If you have varnished with closed-pore varnishes, sand deeply and if necessary remove by stripping with chemical or mechanical means and proceed as on new woods. - If you have varnished with cellulosic or polyurethane varnishes, remove by stripping with chemical or mechanical means and proceed as on new woods. - If you have enamelled with synthetic enamels, remove by stripping by chemical or mechanical means, sand down to wood and proceed as on new woods. - When working outside, protect wood from attacks by fungi and xylophagous insects with Klearxyl Di Wood-Borer Treatment. - For items varnished with CREA ULTRA MATT WOODSTAIN, to maintain their protective efficiency, it is advisable to periodically check the status / appearance of the surfaces. If there is any damage due to impacts and / or scratches, etc.
, we recommend cleaning and sanding the damaged area and re-varnishing it with with CREA LASURE ULTRA MATE.