MONTOSPRAY ACRILICO SATINADO

• Shake the container vigorously for about 2 minutes to achieve a perfect homogenization of its content.
• Perform application tests in an inconspicuous place.
• Protect the areas that will not be painted.
• Apply at a distance of 25-30 cm from the surface in light and crossed passes.
• Do not apply the product at high temperatures or on surfaces exposed to strong sunlight.
• Maintain good ventilation conditions during the drying time.
• Do not apply with relative humidity exceeding 80%.
• Do not use at temperatures below 15ºC.
• When finished, empty the contents of the nozzle by dosing with the container upside down.
• Approximate yield per 400 ml container: 1-2 m² (two crossed coats).

New Support:

New Woods:

• The support must be free of foreign substances and/or residues.
• Apply to woods with a moisture content below 12%.
• Apply to healthy woods, well degreased, dust-free, and dry.
• Sand and remove possible traces of glue in joints and machining defects. If the wood shows signs of aging, it must be sanded beforehand, removing the dust through brushing or any other mechanical means.
• Protect the areas you do not want to paint.
• In general, remove poorly adhered or damaged products.

Iron, Derived Metals, and Other Metals:

• The support must be free of foreign substances and/or residues.
• The surface must be degreased, clean, and dry.
• On oxidized surfaces, remove rust using the usual methods recommended by Monto in any antioxidant manufactured by our Company and apply it previously.
• Protect the areas you do not want to paint.
• In general, remove poorly adhered or damaged products.

Construction (plaster, cement and derivatives, cardboard):

• Remove foreign substances and/or residues.
• The surface must be degreased, clean, and dry.
• Remove possible efflorescences by traditional methods.
• In general, remove poorly adhered or damaged products.

Restoration and Maintenance:

Varnished or Painted Woods:

• In any case, check the adhesion to the previous varnish or paint, and if in doubt, remove it.
• If in doubt, remove the previous varnish or paint.
• If household cleaning products based on silicones have been used during maintenance, it is advisable to sand the wood until completely removed.

Iron and its Enamel Derivatives:

1. On paints in good condition, sand to open the pores, checking that the adhesion is perfect.
2. On paints in poor condition, remove them by mechanical or chemical means and proceed as a new support.