MONTOSPRAY ACRILICO BRILLO

• Shake the container vigorously for about 2 minutes to achieve perfect homogenization of its content.
• Perform application tests in an inconspicuous place.
• Protect areas that will not be painted.
• Apply at a distance of 25-30 cm from the support in light and crossed passes.
• Do not apply the product at high temperatures or on surfaces exposed to strong sunlight.
• Maintain good ventilation conditions during the drying time.
• Do not apply with relative humidity above 80%.
• Do not use at temperatures below 15ºC.
• When finished, empty the contents of the nozzle by dosing with the container upside down.
• Approximate yield per 400 ml container: 1 - 2 m2 (two crossed layers)

New Support:

New Woods:

• The support must be free of foreign substances or residues.
• Apply to woods with a moisture content below 12%.
• Apply to healthy, well-degreased, dust-free, and dry woods.
• Sand and remove possible glue residues in joints and machining defects.
• If the wood shows signs of aging, it must be sanded beforehand, and dust removed by brushing or any other mechanical means.
• Protect areas that you do not want to paint.
• In general, remove poorly adhered or damaged products.

Iron, Derived Metals, and Other Metals:

• The support must be free of foreign substances or residues.
• The surface must be degreased, clean, and dry.
• On rusted surfaces, rust must be removed by usual methods recommended by Monto in any rust inhibitor manufactured by our Company and applied beforehand.
• Protect areas you do not want to paint.
• In general, remove poorly adhered or damaged products.

Construction (plaster, cement, derivatives, cardboard):

• Remove foreign substances or residues.
• The surface must be degreased, clean, and dry.
• Remove possible efflorescence by traditional methods.
• Remove, in general, poorly adhered or damaged products.

Restoration and Maintenance:

Varnished or Painted Woods:

• In any case, check the adhesion to the previous varnish or paint, and if in doubt, remove it.
• If in doubt, remove the previous varnish or paint.
• If household cleaning products containing silicones have been used during maintenance, it is advisable to sand the wood until completely removed.

Enameled Iron and Its Derivatives:

1. Sand over paints in good condition to open the pore, ensuring perfect adhesion.
2. On paints in poor condition, remove them using mechanical or chemical means and proceed as with a new support.