MARISMA MATE

Matte pigmented glycerophthalic synthetic enamel, recommended for alkyd systems on steel, wood, or masonry.

Use
Indoor/Outdoor
Finish
Matte
Performance
12 - 14 m²/L
Drying time
4-5 hours
Formats
0.375L 4L 0.75L

applications

  • Outdoor/Indoor
  • Iron
  • For application on galvanized iron, consult the technical department.

Colors

White 103 and Black 104

  • Stir the product until it is perfectly homogeneous.
  • Apply following the guidelines provided in the attached application chart.
  • Pre-prime new wood with Anticarcoma Klearxyl Di if preventive protection against wood-boring fungi and insects is desired.
  • Do not apply the product in extreme temperatures or on surfaces exposed to strong sunlight.
  • Maintain good ventilation conditions during the drying time.
  • Do not apply in conditions with relative humidity exceeding 80%.

New Support:

New Wood:

  1. The support must be free from foreign products and/or residues.
  2. Apply to wood with a moisture content below 20%.
  3. Apply to healthy wood, well degreased, dust-free, and dry.
  4. Sand and remove possible adhesive residues at joints and machining defects.
  5. If the wood shows signs of aging, it should be sanded, primed, and dust removed through brushing or any other mechanical means.
  6. In this case, the most suitable primer is Sellalux Sealer.

Iron and Its Derivatives:

  1. To protect the support before decoration, treat it with suitable primers (family 6) following the specifications in its data sheet.
  2. For decorating the support, it must be free from foreign products and/or residues, well degreased, dust-free, and dry. If it shows signs of rust, the rust must be removed through brushing or any other mechanical means. Oxifín (see technical data sheet) is also suitable.

Masonry (plaster, cement, and derivatives):

  1. Treat these supports in the usual manner, removing saltpetre, excess moisture, and efflorescence.
  2. Remove foreign products and/or residues.
  3. Once dry, prime with Sellalux Primer.

Restoration and Maintenance:

Varnished or Painted Wood:

  1. If varnished with Montoxyl color: remove foreign products, eliminate poorly adhered or damaged areas, lightly sand, remove the dust resulting from sanding, and proceed as with new wood.
  2. If they have been varnished, remove using paint stripping with Quitamont Universal or mechanical means and proceed as with new wood.
  3. If they have been enamelled with synthetic enamel (Montosintétic, Marisma, Luxatín, or similar), open the pores by sanding, remove the resulting dust, and proceed as with new wood.

Enamelled Iron and Its Derivatives:

  1. For paints in good condition, sand to open the pores, ensuring perfect adhesion.
  2. For paints in poor condition, remove them using mechanical or chemical means and proceed as with new support.



Downloads

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.