Home / Products / Wood treatments / Acabados poliu. tra. (l. y p.) / MONTOPOL TRANSPARENTE SATINADO 29

    • MONTOPOL TRANSPARENTE SATINADO 29

    Two-component transparent polyurethane varnish, for satin finishes, with excellent touch, hardness and fast drying. It stands out for its value for money and its fast drying.
    Use
    Indoors
    Finish
    Satin
    Performance
    12 - 20 m²/L
    Drying time
    15-30 min
    Formats
    25L 5L
    I´m interested in this product

    applications

    • Indoors
    • Wood
    • Product for exclusive use in industries regulated by Directive 2010/75 Chapter V.

    How to apply?

    • Painting brush
    • Air-less gun
    • Air-mix gun
    • Aerographic gun
    • Low preasure turbo

    Colors

    Transparent
    - Stir the product until perfectly blended.
    - Mix without modifying under any circumstances the proportions of part A (MOTOPOL SATINADO MS 29) and of part B (MONTOPOL HARDENER)- Coat thickeners of greater than 120 g/m2 wet per coat.
    -Do not apply product at high temperatures or on overheated surfaces exposed to sunshine.
    -Keep room well ventilated while product is drying.
    -Do not apply when moisture content is 80%.
    -Ensure that CATALIZADOR MONTOPOL MS is totally transparent before performing mixture.
    -For porous wood, dilute the product so it penetrates the pore and so that bubbles do not appear.
    -Minimum time given between coats must be observed to avoid brittle surfaces.
    -Maximum time given between coats must be observed at all times.
    Soporte Nuevo:
    New wood:
    - Apply to wood primed with polyurethane Fondo from the Montopol Range- The base must be free from foreign materials and/or waste matter.
    - Apply to wood with a moisture content of less than 20%.
    - Apply to healthy wood that is dry and free from grease and dust.
    - Sand down and remove any remains of glue in joints and defects from mechanical processes.
    - Apply once the polyurethane base is evenly absorbed. Restauracion y Mantenimineto:
    Varnished or painted wood:
    - If the wood has been varnished with varnishes or paints that have been diluted with white spirit, turpentine, imitation turpentine or solvents for synthetics and oils, these must be removed using a universal stripper or by employing mechanical means, until the new wood is reached treating it as in the previous section.
    - If it is applied to polyurethane varnish,(in dilution solvent polyurethane will be recommended), sand to open the pore, remove the resulting dust using a brush and re-varnish.
    - In any case, check the adhesion on the previous varnish, and in case of doubt, remove it.
    - If silicone-based domestic cleaning products have been used for maintenance, it is advisable to sand the wood until they have been completely removed.

    Downloads

    Data sheet

    I´m interested in this product
    I´m interested in this product

    Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

    Readily available stock

    Gestión automatizada de las ubicaciones y las existencias de los productos.

    Perfect orders

    Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

    Warehouse management

    Ubicación automática de los productos en el almacén mediantes transelevador.

    Fast loading

    8 loading docks for 24-ton trucks.

    Our own transport

    Flota propia de camiones de reparto preparados para transporte ADR.

    We are always close by

    Cadena de tiendas propia y suministro a puntos de venta en toda España.

    liter calculator

    The number of hands depends on the surface to apply the product.

    Para pintar m2 de superficie con mano(s) de pintura necesitas:

    de MONTOPOL TRANSPARENTE SATINADO 29 Satin