PRIMER SILICATO

-Apply this product only on mineral construction surfaces.
-Shake product until perfectly homogenized.
-This product should be dilluted depending on surface condition and porosity level.
-Never apply this product at temperatures under 5º C nor with an 80% moisture content.
-Avoid painting over surfaces in the sun.
-Very absorbent surfaces should be given a first coat of PRIMER SILICATO diluted. Repeat 24 hours later with 2/3 more coats applying product every 12-24 hours.
-Low absorbent surfaces should be given 2/3 coats of OVALDINE SILICATO every 12-24 hours.

Soporte Nuevo:
Cement morter:
-Wait till complete drying of product (30 days minimum).
-Remove off any efflorescences by abrasive jet and neutralize alkaline surfaces.
-Extremely polished surfaces should be sanpapered to open pores.
-Remove off any foreing products or remains.
-Surfaces in bad conditions should be anchored with PRIMER SILICATO-Cover surface imperfections with Plastmont Exteriores (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Plaster:
-Wait till complete drying of product (20% max. Moisture level).
-Remove off any foreign product or product remains.
-Remove off any efflorescences.
-Extremely polished surfaces should be sandpapered to open pore.
-Very damaged surfaces should be anchored with PRIMER SILICATO-Cover surface imperfections with plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces). Restauracion y Mantenimineto:
1. Remove off old paints completely to enable PRIMER SILICATO and OVALDINE SILICATO product be in contact with surface and convert it into stone.
2. Brilliant surfaces should be matted to ensure good adherence.
3.
Cover surface imperfections with suitable putty of plaster (See Family 6 to help you choose the most suitable product to prepare surfaces).
4.
Mildewed surfaces should be previously treated with Montolimp.