Synthetic-based alkyd resins, for sealing porous surfaces that are to be finished with primer pigmented products.
8 - 10 m²/L
Drying time
30-60 min
0.375L 4L 0.75L


  • Outdoors/Indoors
  • Wood
  • Cement
  • Iron
  • Plaster

How to apply?

  • Painting brush
  • Roller
  • Air-less gun
  • Air-mix gun
  • Aerographic gun
  • Low preasure turbo


-Stir product thoroughly.
-Follow application guidelines shown on table below.
-Do not apply product at high temperatures or overheated surfaces exposed to sunshine.
-Keep room well ventilated while product is drying.
-Do not apply when moisture contents is over 80%.
Soporte Nuevo:
Cement morter, plaster and by products.
-Wait till complete drying of product (30 days minimum).
-Surface should be totally dry.
-Remove off any efflorescences and neutralize alkaline surfaces.
-Remove off any foreing products or remains.
-Cover surface imperfections with suitable plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces).
-Mildewed surfaces should be treated with Montolimp.
-New wood:
-Only apply on wood with less than 12% moisture content.
-Sandpaper and eliminate any remains in joints and mechanical faults.
-Old wood should be previously sandpapered and primed. Remove any dust by brushing it off or using any other mechanical system.
-Cover surface imperfections with plaster or putty (See Family 6 to help you choose the most suitable product to prepare surfaces).
-We recommend applying Anticarcomas Klearxyl Di due to its fungicidal action.
Iron and steel:
-Remove off any rust by abrasive blast cleaning before finishing coat application.
-Paint, primer and pre-treatment are equally important.
-If abrassive blast cleaning is not possible, remove off any rust by brushing, sandpapering or any other mechanical system. Any old rust can also be treated by applying our Oxifin (ref. 1900). Restauracion y Mantenimineto:
Iron and its enamelled by-products:
-Any Foreign products, grease or rust should be removed following indications as per new surfaces.
Painted wood and construction (plaster, cement, and by products):
-If they have been varnished with Montoxyl, remove off foreign products and areas in bad condition, sandpaper slightly, remove resulting dust and treat as per new wood.
-If they have been varnished, apply a stripping product such as Quitamont Universal (ref. 3510) or use a mechanical system and proceed as per new wood.


I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.