IMPRIMACION INDUSTRIAL
applications
- Outdoors/Indoors
- steel
- Iron
How to apply?
- Painting brush
- Roller
- Air-less gun
- Air-mix gun
- Aerographic gun
- Low preasure turbo
Colors
-The recommended thickness for all layers is between 25 and 100 micras, depending on the desired protective effect.
-Apply to clean dry substrates, removing any dirt with grease remover or detergents and clean water.
-Apply following the instructions on the application table attached.
-Do not apply the product at high temperatures or on surfaces exposed to strong sunlight.
-Do not apply with relative moisture of over 80% or at temperatures below 5º.
-Ensure the area is well ventilated while the product is drying.
-New metal surfaces:
-The surface should be free from foreign products, rust and/or residues.
-Apply to clean, dry, dust-free surfaces.
-Before applying the finish, a PRE-TREATMENT is required to remove any possible rust, ideally an abrasive blasting, which enables maximum performance of the product in the long term.
-The quality of the pre-treatment is as important as the quality of the primer and paint.
-If, due to initial cost demands, the abrasive blasting is not viable, remove rust by planing or sanding down or using another mechanical means.
-An ideal product for treating old rust formations is Oxifín (cod. 1900). Restauracion y Mantenimineto:
-Iron and its enamelled derivatives:
-Follow the rules for new surfaces with regard to removing foreign products and grease, cleaning and rust.
-Given that there may be a potential adhesion problem between previous coats and the primer, which the user may be unaware of, it is advisable to remove them by stripping, blasting or other means.
Certifications
Downloads
I´m interested in this product
I´m interested in this product
Confirm the product and your contact information to be able to inform you and advise you in a personalized way.
Readily available stock
Gestión automatizada de las ubicaciones y las existencias de los productos.
Perfect orders
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Warehouse management
Ubicación automática de los productos en el almacén mediantes transelevador.
Fast loading
8 loading docks for 24-ton trucks.
Our own transport
Flota propia de camiones de reparto preparados para transporte ADR.
We are always close by
Cadena de tiendas propia y suministro a puntos de venta en toda España.
liter calculator
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de IMPRIMACION INDUSTRIAL Semi Matt