IMPRIEPOX M-10
applications
- Outdoors/Indoors
- Galvanized iron
- Polyesther
- steel
- Aluminum
- Iron
- Brass
How to apply?
- Painting brush
- Roller
- Air-less gun
- Air-mix gun
- Aerographic gun
- Low preasure turbo
Colors
-Mix in the prescribed proportions and let the mixture rest about 5 minutes.
-We recommend total thicknesses between 25 and 100 microns, depending on the desired protective effect.
-Apply to clean, dry substrates, removing the dirt by degreasers or detergents and clean water.
-Apply following the instructions given in the application box marked attached.
-Do not apply at excessive heat, or on surfaces exposed to intense sunlight.
-Maintain good ventilation conditions during the drying time.
-Do not apply at relative humidities above 80%, applied at temperatures above 5 º C.
- New metal supports:
- The support must be free from any foreign bodies, oxides and/or residius.
- Apply to a well-degreased support, without dust and dry.
- To obtain the maximum protection, specially in iron and its derivatives it is a pre-treatment to eliminate the mil scale and rust spots, consisting of an abrasive metal blasting up to a minimum level of Swedish standar (SIS 055900) Sa2. If due to initial cost the abrasive blasting is not feasible, we should treat the metal with a hard metal scraper and wire brush to level Swedish Standard (SIS 055 900) St3. Restauracion y Mantenimineto:
-Iron and its derivatives enamels:
-Follow the instructions given on new supports with respect to the removal of any foreign bodies, degreasing, cleaning and presence of oxides. -Since it is possible an adherence defect in the previous coatings, usually unknown by the applicator and the primer it is recommended the removal of the sames by etching, sandblasting or other ways.
-After use Impriepox M-10 + Catalyst Impriepox M-10.
Downloads
I´m interested in this product
I´m interested in this product
Confirm the product and your contact information to be able to inform you and advise you in a personalized way.
Readily available stock
Gestión automatizada de las ubicaciones y las existencias de los productos.
Perfect orders
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Warehouse management
Ubicación automática de los productos en el almacén mediantes transelevador.
Fast loading
8 loading docks for 24-ton trucks.
Our own transport
Flota propia de camiones de reparto preparados para transporte ADR.
We are always close by
Cadena de tiendas propia y suministro a puntos de venta en toda España.
liter calculator
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de IMPRIEPOX M-10 Semi Matt