PLASMONT AL USO MULTIUSO

-Very absorbent surfaces should be previously moistened.
-Only repaint after indicated drying time, which depends on moisture and temperature conditions as well as coat thickness.
-Use only recommended clean and dust-free tools as per Application Systems.

Soporte Nuevo:
Plaster and cement morter:
-Apply suitable fixer before puttying (see family 6) Emulsion Fijadora, Fijamont, Fijalite.
-Test PLASMONT AL USO suitability on surface.
-Wait till complete drying of product (30 days).
-Remove off any efflorescences and neutralize alkaline surfaces.
-Extremely polished surfaces should be sandpapered to open pores.
-Remove off any foreing products or remains.
-Open any fissures or cracks until obtaining good condition surface. Remove off any resulting dust by brushing and apply PLASMONT AL USO as recommended under Application Systems and Application points.
-For extremely damaged surfaces, use suitable fixer (see family 6) before puttying.
-Recommended maximum thickness per coat should always be observed.
Wood:
-Test PLASMONT ACABADOS suitability on surface.
-Extremely polished surfaces should be sandpapered to open pores.
-Remove off any foreing products or remains.
-Open any fissures or cracks until obtaining good condition surface. Remove off any resulting dust by brushing and apply PLASMONT ACABADOS as recommended under Application Systems and Application points.
-Recommended maximum thickness per coat should always be observed.
-Only apply on wood in good condition, with no trace of resine exudates, dry and free of dust and grease, with less than 20% moisture level.
-Old wood should be previously sandpapered and dust-free. Restauracion y Mantenimineto:
Remove off any remains or chipping of product or any other foreign product. Open pore by sandpàpering or any other mechanical systems.
Test adherence level and treat as per new surfaces.