PRIMER IMPERMEABILIZACION

Rough-texture primer, adhesive bridge for waterproofing paints used on terraces and roofs. Facilitates the distribution and adhesion of subsequent coats of waterproofing paint, as well as the laying of fibreglass mesh.
Use
Outdoor/Indoor
Finish
Smooth Slightly Sanded
Performance
4 - 8 m²/L
Drying time
1-2 hours
Formats
12L

applications

  • Outdoor/Indoor
  • Asphalt fabric
  • Cement
  • Brick
  • Catalan tile
  • Specific Tejamont Top Cover or Montokril Elastic type primer for waterproofing

How to apply?

  • Painting brush
  • Roller

Colors

Red 152
- Clean the surface, getting rid of any dirt, moss, mould etc. and wash with clean, uncontaminated water.
- Stir the product until perfectly homogenised.
- Dilute the product according to the porosity and state of the base.
- It is very important that the temperature of the base be above 5ºC, otherwise the product may freeze.
- Do not apply the product at temperatures below 5ºC or above 35ºC.
Soporte Nuevo:
Cement mortar:
1. Wait until completely set (minimum 30 days).
2. Use an abrasive jet to remove any potential efflorescence from the base and neutralise alkaline surfaces.
3. Sand down highly polished surfaces to open up the mortar.
4. Remove any strange products and/or residues from the base.
5. Use outdoor plaster to fill any defects in the base (In family 6 see PREPARING BASES lines corresponding to powder plaster and prepared fillers to select a suitable solution).
6. Sand down highly polished surfaces to open up the mortar.
7. Apply Fijamont to any cement mortar surfaces so that it does not come into contact with Tejamont Top Cover or Montokril Elastic.
Asphalt shingles:
1. Check adhesion and clean up non-adhesive areas, identifying points where the anchoring is weak. Carry out adhesion tests.
2. Treat mouldy bases with Montolimp.
Brick:
1. Remove any strange products and/or residues from the base.
2. Use outdoor plaster to fill any defects in the base (In family 6 see PREPARING BASES lines corresponding to powder plaster and prepared fillers to select a suitable solution).
3. Treat mouldy bases with Montolimp. Restauracion y Mantenimineto:
1. Completely remove any old paint that is flaking or in poor condition.
2. Dull down glossy surfaces to ensure good adhesion.
3. For painted bases, check the solidity, adhesion and nature of the paint to avoid possible incompatibilities and clear off any dust and dirt before repainting.
4. Use outdoor plaster to fill any defects in the base (In family 6 see PREPARING BASES lines corresponding to powder plaster and prepared fillers to select a suitable solution).
5. Treat mouldy bases with Montolimp.

Downloads

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.