MONTOKRIL CUBIERTAS FIBRADO
applications
- Outdoor
- Cement mortars
- Porous brick
- Catalan tile
- Facades
- Asphalt fabric
How to apply?
- Painting brush
- Roller
Colors
, and wash with clean, uncontaminated water.
- Stir the product until evenly homogenised.
- Slightly dilute the product for the first layer, depending on the porosity and condition of the surface.
- Do not apply the product at temperatures below 5 °C or above 35 °C or when there is a risk of imminent rainfall. The temperature of the surface should be above 5 °C to prevent it from freezing.
On horizontal surfaces.
Cement-based mortars:
- Apply a coat of Fijamont, diluted just enough for the finish to be flat, but with the maximum possible amount of Fijamont. For all cases, we recommend applying a coat of waterproofing Primer Impermeabilización afterwards, which improves adhesion. Let dry at least 24 hours between each waterproofing coat.
- After preparation of the surface, it is recommended to apply several coats of the product at a quantity equal to or above 1.
5 l/m2.
Brick, rasilla catalana tiles and asphalt felt:
- For all cases, after repairing the surface, it is recommended to apply a coat of waterproofing Primer Impermeabilización, which improves adhesion.
On façades.
- After the primer, apply a first coat diluted as necessary, and finish with as many coats as needed to leave the desired amount of product on the surface. We recommend at least 0.
75
- Cement morter:
1.
Wait till complete drying of product (30 days minimum).
2.
Remove off any efflorescences by abrasive jet.
3.
Neutralize alkaline surfaces.
4.
Extremely polished surfaces should be sanpapered to open pores.
5.
Remove off any foreign products or remains.
6.
Very damaged surfaces should be fixed with suitable product (See Family 6)7.
Fill in any defects in the surface with plaster for exteriors (See Family 6). Restauracion y Mantenimineto:
1.
Remove off old paint in bad conditions or with bad adherence.
2.
Brilliant surfaces should be matted to ensure good adherence.
3.
Check paint type and anchoring in painted surfaces to avoid incompatibilities. Remove off any dust or dirt before painting.
4.
Cover surface imperfections with suitable putty of plaster (See Family 6 to help you choose the most suitable product to prepare surfaces).
5.
Mildewed surfaces should be treated with Montolimp.
Certifications
Downloads
I´m interested in this product
I´m interested in this product
Confirm the product and your contact information to be able to inform you and advise you in a personalized way.
Readily available stock
Gestión automatizada de las ubicaciones y las existencias de los productos.
Perfect orders
Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.
Warehouse management
Ubicación automática de los productos en el almacén mediantes transelevador.
Fast loading
8 loading docks for 24-ton trucks.
Our own transport
Flota propia de camiones de reparto preparados para transporte ADR.
We are always close by
Cadena de tiendas propia y suministro a puntos de venta en toda España.
liter calculator
Para pintar m2 de superficie con mano(s) de pintura necesitas:
de MONTOKRIL CUBIERTAS FIBRADO Semi Matt