MAGNUM TERMOAISLANTE ANTICONDENSACION

Water-based paint that simultaneously provides bases with excellent features such as heat insulation, soundproofing and anti-condensation.
Use
Outdoor/Indoor
Finish
Matt
Performance
2 - 6 m²/L
Drying time
1 hour
Formats
15L 4L

applications

  • Outdoor/Indoor
  • Plaster
  • Brick
  • Concrete
  • Plaster
  • Cement mortars

How to apply?

  • Painting brush
  • Roller

Colors

White 103
- Homogenise the product using a spatula, never with a stirrer, so as not to break the microspheres.
- Only apply with a brush or roller, since application using a paint gun can damage the structure of the product.
- Given that its capacity for heat-insulation, soundproofing and anti-condensation depends on the thickness and aspect of the base, our experience offers the following advice:
- North-facing perimeter walls: Apply 2 m2/l. Obtain a minimum thickness of 500 micrometres when dry, for which we recommend three coats.
- South-facing walls and interior partitions: Apply 4-5 m2/l. Obtain a minimum thickness of 200 micrometres when dry, for which we recommend two coats.
- Interior walls and ceilings: Apply 3-4 m2/l. Obtain a minimum thickness of 300-400 micrometres when dry, for which we recommend between 2 and 3 coats.
- Exterior bases: Apply 2 m2/l. Obtain a minimum thickness of 500 micrometres when dry, for which we recommend three coats.
- You can end up with a plastic colored paint, respecting the established recoat time.
Soporte Nuevo:
Cement mortars:
1. Wait until fully hardened (min. 30 days).
2. Clean off possible efflorescence with an abrasive jet.
3. Neutralise alkaline surfaces.
4. For polished surfaces: sand down to open the grain.
5. Clean any unusual products from the base.
6. Fix crumbling bases with Emulsión Fijadora or Fijamont.
7. Fill in any defects/flaws in the base (see family 6)Plaster:
1. Wait until the plaster is dry (maximum 20% humidity).
2. Clean any unusual products from the base.
3. Clean off possible efflorescence with an abrasive jet.
4. Control the absorbency of the base using a sealant, fixative or a diluted coat of the same product.
5. For polished surfaces: sand down to open the grain.
6. Fix crumbling bases with Emulsión Fijadora or Fijamont.
7. Fill in any defects/flaws in the base (see family 6) Restauracion y Mantenimineto:
1. Completely remove any old paint that is flaking or in poor condition.
2. Dull down glossy surfaces to ensure good adhesion.
3. For painted bases, check the solidity, adhesion and nature of the paint to avoid possible incompatibilities and clear off any dust and dirt before repainting.
4. Use plaster to fill any defects in the base (in the family PREPARING BASES see the lines corresponding to powder plaster and prepared fillers to select a suitable solution).
5. Treat mouldy bases with Montolimp.

Downloads

I´m interested in this product
I´m interested in this product

Confirm the product and your contact information to be able to inform you and advise you in a personalized way.

Readily available stock

Gestión automatizada de las ubicaciones y las existencias de los productos.

Perfect orders

Los pedidos son preparados mediante radiofrecuencia reduciendo los errores en su preparación a 0.

Warehouse management

Ubicación automática de los productos en el almacén mediantes transelevador.

Fast loading

8 loading docks for 24-ton trucks.

Our own transport

Flota propia de camiones de reparto preparados para transporte ADR.

We are always close by

Cadena de tiendas propia y suministro a puntos de venta en toda España.