PLASMONT BRICOLAGE YESO

• Use clean, uncontaminated water for dilution.

• Use the tools indicated in the application system, clean and free of oxides.

• Properly prime.

• Repaint once the indicated time has passed. Since this depends on humidity, temperature, and layer thickness, the lack of clogging of the sandpaper will indicate that the product is ready for painting.

• It allows controlled forced drying.

• Suitable as finishing products: Ovaldine, Montoplástica, Montonature, Montosintétic Enamel, Luxatín, and High Decoration products.

New Support:

Cement and plaster mortar:

• Check the suitability of the putty on the substrate.

• Wait for complete curing (minimum 30 days).

• Clean the substrate of possible efflorescence and neutralize alkaline surfaces.

• On excessively polished surfaces, sand to open the pores.

• Clean the substrate of foreign substances and/or residues.

• Open possible cracks to a sound base, remove the dust produced with a brush, and apply the putty or plaster as indicated in the sections Application Systems and Application.

• Never exceed the recommended maximum layer thicknesses.

• On excessively friable surfaces, before plastering, fix with the appropriate fixative (see family 6): Fixing Emulsion, Fijamont, Fijalite. Restoration and Maintenance:

Remove from the substrate poorly adhered or damaged foreign substances, open the pores, if closed, by sanding or other mechanical means. Check adhesion and treat as with new surfaces.